The industrial line is a complete range of equipment for processing walnuts on a production scale. The line is equipped with such a volume of equipment that will automate your production, reduce labor and keep manual walnut bulkheading to a minimum.
Walnut cracking machine K 100 - equipment for processing walnuts at industrial enterprises. It has a conical crack principle, does not require calibration of the walnut, cracks the shell as gently as possible, and provides up to 80% of the whole kernel yield.
| Performance | up to 100 kg/h |
| Whole kernel output | up to 80% (% may increase or decrease, depending on the quality of the nut) |
| Engine power | 0.55 kW |
| Complete set | 220/380 V |
| Warranty | 12 months, post-warranty service |
| The crack principle | conical |
The calibrator is designed to sort nuts by size from small to large for further high-quality and cost-effective processing of nuts on industrial nutcrackers that require preliminary calibration of the nut.
On the calibrator, the gaps between the shafts can be adjusted independently, depending on the size of the nut, it is possible to adjust for any type of nut - walnut, hazelnuts, almonds, etc.
| Performance | up to 150 kg/h |
| Number of factions | 2-5 |
| Engine power | 0.37 kW |
| Complete set | 220 V |
| Warranty | 12 months, post-warranty service |
| Ability to calibrate | walnut, hazelnuts, almonds |
Vibrating sieve with aspiration is designed for screening out shells, partitions and dust from the nut kernel and sorting the kernel into fractions (sizes) - halves, quarters, eighths of the kernel and crumbs. Vibrating sieve with aspiration is used for high-quality and quick sorting of nuts in large volumes.
| Performance | up to 200 kg/h |
| Hole sizes | 11, 16, 20/45 mm (can be changed at the request of the customer) |
| Engine power | 3.4 kW |
| Complete set | 220/380 V |
| Warranty | 12 months |
Approximate calculations and costs of equipment productivity, rental of premises:
Industrial line capacity up to 100 kg/h. With a standardized 8-hour working day, the equipment is capable of processing up to 800 kg of walnuts (calibration, splitting, sorting of nuts).
One operator is required to service each unit. It is important to understand that the line will reduce the cost of hiring personnel, but you cannot completely abandon the manual bulkhead. The optimal number of personnel for continuous and high-quality operation of the equipment: 5-10 people (the number will depend on the premises, the experience of the workers, the number of undershoots).
- Premises: from 30 sq.m.
• Line length: 500 cm.
• Line width: 300 cm.
• Approximate electricity costs: 34,56 kW: (0.55 + 0.55 + 3.4) * 8 = 34,56 kW.
* Where 8 is the number of hours, and in brackets is the power consumption of each unit.
- Number of staff: 5-10 people.
* The line can be converted and completed according to the requests and requirements of the client.
* The color or shade of the product in the photograph may differ from the real one.
Shipping cost is NOT included in the price of the item. To find out the cost of delivery to your country, contact the manager. All about the terms of delivery and payment here.
! Declared characteristics may differ when using low-quality raw materials.
* Low-quality raw materials mean:
- walnut affected by disease, mold or rot;
- a walnut with a thick shell and partitions ingrown into the kernel;
- overdried walnut (the kernel crumbles during processing);
- wet elastic walnut, which, after splitting, retains its integrity and will not do without manual cleaning.
